Our construction-related work sits on the structural and equipment side of the industry, not on rebar. We supply the shafts, pins, brackets and forged sections that go into construction plant, lifting equipment, crusher units and heavy-frame fabrications — where structural carbon steel meets engineering alloy.
Construction is a sector we serve selectively. We are not a rebar yard or a structural section trader — what we supply into construction is the engineering side: the shafts, pins, bushings, forged components and heavy bar that go into the plant equipment and lifting machinery used on site, and the medium-carbon bar that goes into heavy-frame fabrications.
On the equipment side, that means crusher shafts, conveyor rollers, lifting-equipment pins, base-plate bar and structural fabrication blanks — typically in EN8, C45, EN19 or EN24 depending on the load. On the lifting and rigging side, we supply the high-tensile alloy steel that goes into hooks, links and load-bearing pins.
The relationship we have with construction-side buyers is straightforward: where the application is structural and the part takes engineering loads, we are the right supplier. Where it's rebar or concrete-reinforcement product, we are honestly not your best option — and we'll say so.
The finished parts that start out as Saroj round, square, hex or forged bar — with the grades typically specified for each.
Heavy-section shafts for stone crushers, mobile crushing plants and conveyor systems. High-tensile or through-hardening alloy.
Load-bearing pins, kingpins, link rods for cranes, hoists and lifting equipment. Through-hardening alloy is the standard.
General-purpose engineering bar for construction-plant machined components — bushes, rollers, bearings, brackets.
Cut-to-size blanks for heavy fabrication — base plates, support brackets, gussets, support pins.
Forged round bar for large-section construction-equipment parts where rolled bar isn't suitable.
Why each grade earns its place on a typical construction bill of materials. Click any for full composition, properties and equivalents.
General-purpose medium-carbon engineering bar for construction plant machined components and heavy fabrication.
Higher-carbon steel for parts needing more strength and surface hardness — wear-loaded plant components.
European-standard medium-carbon equivalent of EN8. Specified where the drawing calls for C45 or DIN 1.0503.
High-tensile alloy steel for the heavily loaded shafts and pins in construction plant — crushers, conveyors, lifting equipment.
Maximum-strength through-hardening alloy for the most critical lifting-equipment pins, kingpins and heavy plant components.
We supply the bars that become machined construction-equipment parts — not the rebar that goes into the concrete. Be clear about what you need; we will be clear about whether we can supply it.
Plant equipment often runs to large-diameter shafts and pins. We carry forged round bar in our alloy range, UT-tested on every consignment.
MTC and UT pass report with every consignment. For lifting equipment and load-bearing parts where third-party witness is required, EN 10204 3.2 equivalent on request.
Own fleet for Gujarat dispatch, road transport for pan-India project sites. Delivery direct to the fabrication workshop or construction site as required.
Five automatic CNC saws cut blanks to your exact dimensions. Saves the fabrication workshop's saw time and material waste on volume jobs.
We sell what we know. Engineering steel for plant equipment — yes. Rebar, TMT bar, structural sections — not our line, and we'll tell you so.
No — we don't. Saroj Enterprise stocks engineering steel: alloy, carbon, tool and die steel as round, square, hex and flat bar. We do not stock TMT rebar, RCC reinforcement, structural sections (I-beams, channels, angles) or sheet/plate beyond our flat-bar range. For those, you need a structural-steel trader.
Engineering bar for construction plant and equipment — crusher shafts, conveyor rollers, lifting equipment pins and links, heavy-fabrication blanks, base plates, brackets and machined plant components. Typical grades: EN8, EN9, C45 for general work; EN19, EN24 for high-tensile and lifting applications.
Yes — through-hardening alloy bar (EN19 or EN24) is our standard recommendation for lifting-equipment pins, kingpins and load-bearing links. We supply with MTC + UT certificates as standard, and can arrange EN 10204 Type 3.2 equivalent third-party witnessed certificates on request for safety-critical applications.
We deliver to your fabrication workshop or main yard within Gujarat using our own fleet. For pan-India project sites we arrange road transport. Direct-to-site delivery is possible but the workshop or staging yard is usually more practical for material handling.
Yes. Forged round bar is available across our alloy steel range (EN19, EN24, and others on request) — UT-tested to ASTM A388 on every bar. Forging refines the grain and closes internal voids, which matters for the large-section shafts used in heavy plant equipment.
Plant shafts, lifting pins, heavy-fabrication blanks. Share your drawing and tonnage.
